Advanced Surface Operations Ribbon - Intergraph Smart 3D - Administration

Intergraph Smart 3D Geometry Analysis and Repair

Language
English
Product
Intergraph Smart 3D
Subproduct
Geometry Analysis and Repair
Search by Category
Administration & Configuration
Smart 3D Version
12.1 (2019)

Sets options for performing advanced surface operations.

Operation

Select the operation to perform. The operation remains selected until you choose another.

  • Split - You select a single face to be split. Then, you select a single intersecting edge to be the splitter.

  • Select the Splitter - Select an intersecting edge, or the point for the intersecting edge. This option is only active when the Split operation is selected.

  • Merge - You select any combination of sheet-bodies and faces. The software attempts to merge them together into a new sheet-body.

  • Merge Tolerance - Value that controls the creation of tolerant geometry during the merge process.

  • Explode - You select sheet-bodies, and the software converts them to individual, disconnected, faces.

  • Rebuild - You select one or more faces. The software creates new geometry by rebuilding the underlying surfaces with the specified degree and number of control points. You can specify that trimmed faces are converted to natural faces with the Trim to Boundaries option.

  • Snap - You select any number of faces. The software adjusts the faces that lie within the specified tolerance to lie exactly on the plane. You can choose an object in the view to set the plane.

Select

Selects one or more objects from the view for the chosen operation.

Apply

Applies the operation to the selected objects.

Undo

Reverses the operation by replacing the results with the data before the operation was applied. You can modify a setting, re-apply, undo, and repeat until you are satisfied with the results.