In this section, you will learn how to add a lap joint flange that represents the primary piping commodity, and the stub end that represents the reportable piping commodity for reporting purposes. The stub end may not necessarily be modeled.
Add records in spec CC150-1 as shown below:
Item |
Option |
Size |
Commodity Code |
Description |
---|---|---|---|---|
Flange |
177 |
4” -8” |
FLJABGDRFAH9ZZZZ |
Lap Joint Flange, ASME B16.42 (Ductile Iron Flanges), Class 150, Raised Face Flanged End ASTM A395-Ductile |
Stub end |
5177 |
4”-8” |
BSELABMFBACIZZZZ |
Stub End Long Pattern, ASME B16.9, Steel Beveled End Fittings, Raised Face x Beveled End, ASTM A234 Grade WPB, Galvanized, Seamless |
If idents are missing, AssociatedCommodityCode will be missing in PCF, and !C_NOFO will appear.
-
Open Spec Editor, click the components tab and create the lap joint flange and stub end specification items as shown below.
-
Save the changes and lock the grid.
Creating Gasket Records
-
Go to Integration > Smart3D > Smart3D Configuration, go to Templates tab, expand TRAINING_TEMPLATE and select the GasketSelectionFilter worksheet.
-
Click the Filter button in the grid view and key in the following details. This will filter out the gasket selection entries for CC150-1.
-
Click Edit Grid i and enter the following records.
-
Save the changes and lock the grid.
-
Go to Integration > Smart 3D > Smart 3D Transfer Jobs. Create a new run of the export job CC150-1 and start the job.