Bolted Connections Common Tasks - Intergraph Smart 3D - Reference Data

Intergraph Smart 3D Piping Reference Data

PPMProduct
Intergraph Smart 3D
PPMCategory_custom
Reference Data
Version_S3D
10.1(2014R1)

By following these tasks, you can define the rules, or options, needed to use bolted and mechanical connections in your piping specification.

Define Bolt Selection Filters

Define selection rules for the studs, machine bolts, and cap screws used for bolted joints in the model. For more information, see Define Bolt Selection Filters.

Define Clamp Selection Filters

Define selection rules for the clamps used in mechanical joints in the model. For more information, see Define Clamp Selection Filters.

Define Gasket Selection Filters

Define selection rules for the gaskets used in bolted joints in the model. For more information, see Define Gasket Selection Filters.

Define Nut Selection Filters

Define selection rules for the nuts used in bolted joints in the model. For more information, see Define Nut Selection Filters.

Define Washer Selection Filters

Define selection rules for the washers used in bolted joints in the model. For more information, see Define Washer Selection Filters.

Specify Bolt Thread Extensions

Define the length of the exposed threads for the bolt length calculation for stud and machine bolts. For more information, see Specify Bolt Thread Extensions.

Define the Cap Screw Calculation Tolerance

Specify the negative, or positive, tolerance on the bolt length that is used when calculating the cap screw length. For more information, see Define Cap Screw Calculation Tolerance.

Define the Machine Bolt Calculation Tolerance

Specify the negative, or positive, tolerance on the bolt length that is used when calculating the machine bolt length. For more information, see Define Machine Bolt Calculation Tolerance.

Define the Stud Bolt Calculation Tolerance

Specify the negative, or positive, tolerance on the bolt length that is used when calculating the stud bolt length. For more information, see Define Stud Bolt Calculation Tolerance.

Define the Preferred Cap Screws Length

Specify the list of available purchased, or preferred, bolt lengths for cap screws. For more information, see Define Preferred Cap Screws Length.

Define the Preferred Machine Bolt Length

Specify the list of available purchased, or preferred, bolt lengths for machine bolts. For more information, see Define Preferred Machine Bolt Length.

Define the Preferred Stud Bolt Length

Specify the list of available purchased, or preferred, bolt lengths for stud bolts. For more information, see Define Preferred Stud Bolt Length.

See Also

Piping Reference Data Common Tasks