Modify components placement direction relation - Intergraph Smart 3D - Help

Intergraph Smart 3D Material Handling

PPMProductFamily
3D Design and Visualization
PPMProduct
Intergraph Smart 3D
PPMCategory
Help
Version_S3D
12.1(2019)
  1. Click Tools > Modify Components Relation.

  2. Select a segment on the belt.

    The software displays the current placement direction relation of all associated belt components.

  3. Select the Reverse Placement Direction check box, to toggle the placement direction relation.

  4. Click Finish.

    The software reverses the placement direction relation of all associated belt components.

    You must reset the relation to the default, after you modify the belt profile. To reset, repeat the above procedure.