The Generic-ItemCode-Map sheet is a generic map between a given ItemCode (AABBCC code in PDS) to Smart 3D short Code / Tag. Ideally, all short codes should be kept common across specs. You cannot relocate or rename the columns in the ItemCode related worksheets.
Component ItemCode - Enter the PDS commodity name. Do not change existing entries in this column. Add new entries to the bottom.
S3D Short Code - Enter the corresponding short code that is available in the piping specification. Leave this column blank if you want to map the component ItemCode directly to a tag number in the next column.
S3D Tag Number - Enter the tag number to map the component ItemCode. You must leave the short code column blank if you define a tag number.
Is Specifically Placed - Specify if the item is specifically placed (Y) or it implied by the route (N). Examples of specifically placed items (Y) are: valves, flange pairs (takedowns), end flanges, caps, ends, spectacle blinds, blind flanges. Examples of implied items (N) are: pipes, elbows, tees, other branch components, reducers, flanges around valves.
S3D Geometry Type - Enter the geometry type code.
Geometry Type |
Code |
PlainPipingOrTubingVariableLength |
5 |
PlainPipingOrTubingFixedLength |
10 |
LinearSymmetrical |
15 |
ElbowFixedAngleIncludingAngleValves |
20 |
ElbowTrimmable |
25 |
ElbowSideOutlet |
30 |
ElbowRadialOutlet |
35 |
Return |
40 |
ReturnBottomOutlet |
45 |
ReturnSideOutlet |
50 |
Pipebend |
55 |
Miter |
60 |
EccentricSizeChange |
65 |
ConcentricSizeChange |
70 |
TeeFullSizeIncluding3wayValves |
75 |
TeeReducingBranch |
80 |
TeeEccentricReducingBranch |
85 |
TeeReducingRunAndBranch |
90 |
TeeReducingRuns |
95 |
TeeWithOffsetFullSize |
100 |
TeeWithOffsetReducingBranch |
105 |
TeeWithOffsetReducingRunAndBranch |
110 |
TeeWithOffsetReducingRuns |
115 |
TeeWithDoubleOffsetFullsize |
120 |
TeeWithDoubleOffsetReducingBranch |
125 |
TeeWithDoubleOffsetReducingRunAndBranch |
130 |
TeeWithDoubleOffsetReducingRuns |
135 |
TeeNonSymmetrical |
140 |
CrossFullsizeIncluding4wayValves |
145 |
CrossReducingBranches |
150 |
CrossReducingRunAndOneBranch |
155 |
CrossReducingRunAndTwoBranches |
160 |
LateralFullsize |
165 |
LateralReducingBranch |
170 |
LateralReducingRunandBranch |
175 |
LateralReducingRuns |
180 |
OletTypeBranch |
185 |
LatroletTypeBranch |
190 |
NonradialBranch |
195 |
EndoletTypeBranch |
200 |
Elbolet |
205 |
TrueYTypeBranch |
210 |
DoubleYTypeBranch |
215 |
ClosingIncludingInstrumentIndicatorsAndTransmitters |
220 |
OrificeFlange |
225 |
MultiportValve |
230 |
Generic |
500 |
Is Rotation Applicable - Enter Y if the component can be rotated.
Port # to use as S3D Location - Enter the port number which corresponds to the location of the component. Enter 0 if it is the origin.