Change the spacing between posts - Intergraph Smart 3D - Help

Intergraph Smart 3D Material Handling

PPMProductFamily
3D Design and Visualization
PPMProduct
Intergraph Smart 3D
PPMCategory
Help
Version_S3D
12.x(2018)
  1. In the Grids task, click Select on the vertical toolbar.

  2. Select Grid Plane in the Locate Filter box.

  3. Select an X-axis plane in the grid system of the truss to modify.

  4. Select a plane coincident with the post to move.

    The Place Grid Plane ribbon appears.

  5. In the Offset box, type the required value and then press Enter.

    The software modifies the width of the truss as specified.

The following example shows the results of modifying the spacing. Illustration A shows the original truss. Illustration B shows the truss after moving the first post -6 m.