RECT_FLAT_OVAL - PDS - 2011 R1 - Help

Project Engineer HVAC Help

PPMProductFamily
3D Design and Visualization
PPMProduct
PDS
PPMCategory
Help

The user function RECT_FLAT_OVAL enables you to place a rectangular to flat oval transitional element with faces parallel but offset from each other along both the secondary and normal axes. It is placed by a point in the middle of the rectangular face. The active primary axis orients the direction of projection and the normal of each face. The active secondary orients the flat sides of the flat oval shape and a side of the rectangular face.

Calling Sequence

call USER_FUNCTION ('RECT_FLAT_OVAL', projlen, length1,
depth1, length2, offset1, offset2,
update_flg)

Arguments

  • projlen -- length of projection.

  • length1 -- length of rectangular face along the secondary axis.

  • depth1 -- depth of rectangular face along the normal axis.

  • length2 -- flat segment length of flat oval face along the secondary axis.

  • depth2 -- depth of flat oval face along the normal axis.

  • offset1 -- offset of flat oval face from rectangular face along the secondary axis.

  • offset2 -- offset of flat oval face from rectangular face along the normal axis.

  • update_flg --

    0 -- do not update active point or orientation upon exit (default).

    1 -- update active point and orientation to the flat oval face upon exit.