Assign unique part numbers - Intergraph Smart 3D - Help

Intergraph Smart 3D Isogen Isometric Drawings

PPMProductFamily
3D Design and Visualization
PPMProduct
Intergraph Smart 3D
PPMCategory
Help
SPFVersion_custom
2019 (10.0)
Version_S3D
12.x(2018)
Version_IConfig
6.0(2016)
Version_ICP
2.0(2016)
Version_ISOGEN
13.0(2016)

Unique numbers are applied to each part on the isometric drawing. This is typically used for traceability and to assign heat numbers.

The part numbers are unique per pipeline and are in the format of 1.x, where x is a number or an alpha character. The examples below show the two format options (highlighted in yellow).

A table of unique part numbers can also be plotted on the isometric drawing. This table is usually mapped against the manually-input heat numbers. An example is shown below:

  1. On the Home screen, select Part Numbers in the Materials category tile.

    The software switches to the Configuration view and the Part Numbers panel.

  2. Expand Format.

  3. Set Unique Part Number to Alpha or Numeric, depending on the required suffix.

  4. Use Unique Gasket Numbers and Unique Bolt Numbers to control whether gaskets and bolts are assigned unique numbers.

  5. Set the remaining properties as needed.

  6. Click to update the isometric style file with the new property settings.

  7. Use the Drawing Preview panel to review your changes.

To output and define the contents of a traceability file, see Define the report layout.