Dimensioned Label Command - Intergraph Smart 3D - Help

Intergraph Smart 3D Isogen Isometric Drawings

PPMProductFamily
3D Design and Visualization
PPMProduct
Intergraph Smart 3D
PPMCategory
Help
SPFVersion_custom
2019 (10.0)
Version_S3D
12.x(2018)
Version_IConfig
6.0(2016)
Version_ICP
2.0(2016)
Version_ISOGEN
13.0(2016)

Places a label with dimension formatting. The dimension displays the label instead of a dimension value. Dimensioned Label is an option on the Place a Label ribbon. You can select Distance Between , Coordinate Dimension , SmartDimension , or Angle Between . For more information on the formatting of each dimension type, see Distance Between Command, Coordinate Dimension Command, SmartDimension Command, and Angle Between Command in the SmartSketch Drawing Editor Help.

Before selecting Dimensioned Label, you must select an appropriate label from Label Specification on the Place a Label ribbon. The following example shows a dimensioned label on a composed drawing. A Distance Between dimension is placed between two pumps with the Equipment_Plane Equipment_Name label selected.

Only two objects can be selected with Dimensioned Label. The label placed is determined by the first object you select, not the second.

See Also

Place a Dimensioned Label (Marine mode only)
Place a Dimensioned Label (Plant mode only)