Set Eye Point - Intergraph Smart Review - Help

Intergraph Smart Review Help

Language
English
Product
Intergraph Smart Review
Search by Category
Help
SmartPlant Foundation / SDx Version
10
Smart Review Version
2020 (15.0)
  1. Click View > Settings > View.

  2. Select the View Cone tab.

  3. Verify the North eye point setting.

  4. Verify the East eye point setting.

  5. Verify the Elevation eye point setting.

  6. If the eye and center points get too close together, some viewing operations cease to function properly. To correct this problem, do one of the following:

  • Place a new center point. For more information, see Set Center Point.

  • On the View Cone tab, enter new values for the eye and/or center points, as well as the viewing angles.

  • Use the Position Control toolbar to adjust the eye point, center point, and viewing angles. For more information, see Position Control Toolbar.

  • You also can place the eye point by clicking View > Place > Eye Point Only, which allows you to place the eye point by locating a 3D point using one or more of the graphic views. For more information, see Placing 3D Points.

  • You also can place the eye point by clicking View > Place > View by Eye Point, which allows you to place a view based on eye point, which involves the perspective that you have when viewing the file.

  • You also can set the eye point interactively by using the mouse to drag the eye point of the view cone in the Plan or Elevation views. You must hold the left mouse button down for at least 1 second or drag it at least 8 pixels before the eye point adjustment mode allows the eye point to change. You can right-click or press ESC to cancel the eye point adjustment without saving the changes. Any changes to the eye point made in this manner can be reversed using the Edit > Undo command.

See Also

Set Clipping Planes
Place Far Clipping Plane
Place Near Clipping Plane
Set View Cone Display
Perspective Angle Toolbar