Use Mouse Only or Mouse + Keyboard Combinations (Fly Mode) - Intergraph Smart Review - Help

Intergraph Smart Review Help

Language
English
Product
Intergraph Smart Review
Search by Category
Help
SmartPlant Foundation / SDx Version
10
Smart Review Version
2020 (15.0)

In Fly mode operation, use your mouse to look around and work in conjunction with your keyboard for motion in all directions. Change the viewing direction with the mouse and move around with the keyboard.

By using mouse-only or mouse + keyboard controls, you can:

  • Look 360 degrees around from a stationary point.

  • Travel through your model to move up and down stairs and ramps

  • Move sideways in a sidestepping motion.

  • Move up and down to change your elevation.

  • When you are in Fly mode, the cursor changes to a crosshair that is located at the center of your view window. When you exit Fly mode, the cursor changes back to its original pointer.

  • The motion in 3D navigation is always view independent. Motion control set using the legacy navigation commands are not applied when you are using 3D navigation.

  • Walk through your model in the direction of the crosshair. Roll the middle mouse wheel forward and back, or press and hold the designated WASD key. A left or right move is a sidestepping motion.

  • A middle mouse click moves you halfway in to your target point. Use SHIFT + Middle Mouse Click to move back out the distance of the eye point from the target. The perspective angle does not change.

  • Walk at various angles through your model. Roll the mouse wheel forward and backward while holding down the designated direction key. Or, hold down the two direction keys simultaneously.

    In a key combination move, if you release one directional key, you still continue moving in the direction of the other key.

  • Look around the model as if you were turning your head. Move the mouse up/down, left/right from the crosshair point.

  • When rotating around an object, the encircle point is the current center point; not the center of the selected object.

Fly mode actions:

To...

Use...

Enter/Exit Fly mode

F (Toggle to enter/exit)

Exit fly mode, cancel all fly mode operations

F again (Toggle on/off), ESC or right-click

Turn on/off crosshair

X (Toggle on/off)

Move in

Mouse Wheel Forward -or- W

Move in (factor of 2)

Middle Mouse Button/Wheel Click

Move left

A

Move out

Mouse Wheel Backward -or- S

Move out (factor of 2)

SHIFT + Middle Mouse Button/Wheel Click

Move right

D

Move up

E

Move down

C

Move in and left.

W + A -or- Mouse Wheel Forward + A

Move in and right

W + D -or- Mouse Wheel Forward + D

Move out and left

S + A -or- Mouse Wheel Backward + A

Move out and right

S + D -or- Mouse Wheel Backward + D

Move left/right/up/down

Middle Mouse Drag

Look up

I -or- Mouse Move Forward

Look left

J -or- Mouse Move Left

Look down

K -or- Mouse Move Backward

Look right

L -or- Mouse Move Right

Return to the default view of your model

H

Create your own custom home view

CTRL+H

Reset a customized home view back to the original default home view

CTRL+SHIFT+H

Encircle or rotate around an object

Left mouse - press and hold