Edit Tab (Measurement Collections Dialog Box) - Intergraph Smart Review - Help

Intergraph Smart Review Help

Language
English
Product
Intergraph Smart Review
Search by Category
Help
SmartPlant Foundation / SDx Version
10
Smart Review Version
2020 (15.0)

Creates or edits basic information for an existing measurement collection. With the Edit tab, you also can display each collection independently from the other collections or select a specific range of measurements in a collection to display or delete.

  • The active measurement collection is the last measurement collection selected immediately before exiting the Edit tab.

  • Measurement collection names cannot contain single tick marks ( ' ).

  • You cannot rename a measurement collection. If you change the collection name, the software creates a new collection.

Name

Sets the required name of the measurement collection.

Delete

Removes the selected measurement point range in the active collection.

Description

Sets an optional description of the measurement collection. You can also type in a URL address (such as www.hexagonppm.com) to access a valid website, or open a document (file:///[drive]:\[folder name]\[file name]). The information and hyperlinks can be accessed from the Text window (Window > Text).

On

Displays all or part of a measurement collection using the selected point range.

Continuous measurement

Displays measurements between the points that you select with the rolling measuring tape. The software displays one measurement between each point continuously. For example, points 1 to 2, 2 to 3, and 3 to 4 will have measurements. You will see three measurements if you provide four points.

Turn this option off to display measurements between each point pairs but to not display measurement between multiple pairs of points. For example, points 1 to 2 and 3 to 4 will have measurements but points 2 to 3 would not have a measurement. You will see two measurements displayed if you provide four points. You can turn this option on or off at any time to meet your needs.

Dynamic measurement rubberband

Measures dynamically from one selected measurement point over any graphic in the model to the next selected measurement point.

Use range box snaplocks

Specifies that you want to use the snaplocks for the range box instead of geometric snaplocks on a graphic element.

Turn this option off to use the geometric snaplocks on the graphic element instead of those on the range box.

Range box on measurement points

Displays the range box around the measurement points.

Measurement of graphic range box

Displays the range box dimensions of measured graphic elements in the Text window.

From

Selects the starting measurement point in a collection for display or deletion.

To

Selects the ending measurement point in a collection for display or deletion.

Display

Displays the selected measurement point range to assist you in determining which measurement points to delete.

Delete

Removes the currently selected point range.

See Also

Measurement Collections Dialog Box
Edit Measurement Collections
Creating Measurement Collections