Add end segment to existing wall using 2-D sketch - Intergraph Smart 3D - Help

Intergraph Smart 3D Civil

PPMProductFamily
3D Design and Visualization
PPMProduct
Intergraph Smart 3D
PPMCategory
Help
Version_S3D
12.1(2019)
  1. Click Select on the vertical toolbar.

  2. Set the Locate Filter to Wall Systems.

  3. Select the wall to which to add another wall segment.

  4. Click Select a Path on the ribbon.

  5. Click Sketch 2D on the ribbon.

  6. Select objects in the model to see when sketching the wall path in the 2-D environment.

  7. Click Draw .

  8. In the 2-D environment, add on to the path of the existing wall path.

  9. In the 2-D environment, click Close .

  10. Click Finish.

  11. Set the wall system, type, composition, and other properties.

  12. Optionally, click Select Boundaries to limit the height of the wall.

  13. Click Finish.

    The software places the new wall segments in the model.