HVAC Material Take-Off (HVAC) - Intergraph Smart 3D - Help

Intergraph Smart 3D Reports

PPMProduct
Intergraph Smart 3D
PPMCategory_custom
Help
SPFVersion_custom
7.1 (2018 R1)
Version_SThreeD_Custom
11 (2016)

HVAC duct, fabricated parts, fittings, transitions, registers, and dampers are listed with quantities and other information.  This may be embedded into a drawing.

[Reference Data Folder]\SharedContent\Reports\Types of Reports\HVAC\Material Take-Off\Material Take-Off.rtp

Duct

Section  #FormattingUOM::{Section}#  #Duct::[CrossSection]#
Length  #FormattingUOM::{Length}#  #Duct::[LengthFormatted]#
Sheet Weight  #FormattingUOM::{Weight}#  #Duct::[WeightFormatted]#

Total Weight  (SUM)

Fabricated Part

Name  #Fabricated::Name#
Duct Section Max  #FormattingUOM::{Section}#  #Fabricated::CrossSectionMax#
Sheet Weight  #FormattingUOM::{Weight}#  #Fabricated::[outHVAC Fabricated Weight]#

Total Weight (SUM)

Fitting

Item Number  #Fitting::ItemNum#
Category  #Fitting::Category#
Description  #Fitting::PartDescription#
Angle  #FormattingUOM::{Angle}#  #Fitting::[outHVAC Angle Value]#
Inlet  #FormattingUOM::{Section}#  #Fitting::Inlet#
Outlet  #FormattingUOM::{Section}#  #Fitting::Outlet#
Branch1  #FormattingUOM::{Section}#  #Fitting::Branch1#
Branch2  #FormattingUOM::{Section}#  #Fitting::Branch2#
Quantity  #Fitting::[Quantity]#
#Fitting::PlaneOfTurn#
#Fitting::ElbowThroatRadius#
#Fitting::CornerRadius#
#Fitting::Angle#
#Fitting::CategorySort#
#Fitting::Diff#

Transition

Item Number  #Transition::ItemNum#
Category  #Transition::Category#
Description  #Transition::PartDescription#
Length  #FormattingUOM::{Length}#  #Transition::[outHVAC Transition Length]#

Inlet  #FormattingUOM::{Section}#  #Transition::Inlet#
Outlet  #FormattingUOM::{Section}#  #Transition::Outlet#
Quantity  #Transition::[Quantity]#
#Transition::Length#
#Transition::Diff#

Register – Diffuser – Grille

Type  #Register::Type#
Section  #Register::[outHVAC Linear Duct Cross Section Size]#
Model  #Register::Model#
Quantity  #Register::[Quantity]#

Damper – Other In-line

Type #Damper::Type#
Duct Section #FormattingUOM::{Section}# #Damper::CrossSectionMax#

Model #Damper::Model#
Quantity #Damper::[Quantity]#