Gasket Part Data (Catalog Engineering Checks\Piping) - Intergraph Smart 3D - Help

Intergraph Smart 3D Reports

PPMProduct
Intergraph Smart 3D
PPMCategory_custom
Help
SPFVersion_custom
7.1 (2018 R1)
Version_SThreeD_Custom
11 (2016)

Creates a report of gasket part data to be used for review and approval of the reference data in your catalog.

Unit of Measure inputs are required when running this delivered report.

It is located in the [Reference Data Folder]\SharedContent\Reports\Types of Reports\Catalog Engineering Checks\Piping\Gasket Part Data folder.

Index tab

   Worksheet Name

   Remarks

Gasket Part Data tab

   Industry Commodity Code #GPD::IndustryCommodityCode#

   Ring Number #GPD::RingNumber#

   Nominal Diameter From #GPD::NominalDiameterFrom#

   Nominal Diameter To #GPD::NominalDiameterTo#

   Nominal Diameter #GPD::NominalDiameter#

   Npd Unit Type #GPD::NpdUnitType#

   Gasket Industry Standard #GPD::GasketIndustryStandard#

   Gasket Type #GPD::GasketType#

   Thickness For 3D Model #GPD::[lbl_ThicknessFor3DModel]#

   Procurement Thickness #GPD::[lbl_ProcurementThickness]#

   Materials Grade #GPD::MaterialsGrade#

   Gasket Outside Diameter #GPD::[lbl_GasketOutsideDiameter]#

   Gasket Inside Diameter #GPD::[lbl_GasketInsideDiameter]#

   Gasket Outside Diameter Basis #GPD::GasketOutsideDiameterBasis#

   Flange Insulation Kit Type #GPD::FlangeInsulationKitType#

   Insulating Washer Thickness #GPD::[lbl_InsulatingWasherThickness]#

   Metallic Electro Plated Washer Thickness #GPD::[lbl_MetallicElectroPlatedWasherThk]#

   Maintenance Factor #GPD::MaintenanceFactor#

   Flange Pressure #GPD::FlangePressure#

   Stress At Which Seal Is Initiated #GPD::StressAtWhichSealIsInitiated#

   Tightness Curve Slope #GPD::TightnessCurveSlope#

   Intersection Of Unload Curve With Vertical Axis #GPD::IntOfUnloadCurveWithVerAxis#

   Minimum Tightness Parameter #GPD::MinimumTightnessParameter#

   Maximum Tightness Parameter #GPD::MaximumTightnessParameter#

   Maximum Temperature #GPD::MaximumTemperature#

   Maximum Pressure #GPD::MaximumPressure#

   Gasket Inside Diameter Basis #GPD::GasketInsideDiameterBasis#