In this procedure, you use the Process Data module options to define process data
for instrument tag 101-FE-100 by copying process data from line
4"-P-1501-11H.
-
On the module toolbar, click Instrument
.
-
On the Enter Tag Number dialog box, type the instrument tag number
101-FE-100 and click OK.
Use the Tab key to move the cursor to the character separators.
-
After the Process Data window opens, from the toolbar click Edit > Copy From > Line.
-
Click OK to copy data from line 4"-P-1501-11H to the current flowmeter and open the Flowmeter Process Data window.
The software allows you to copy process data from a line on the fly in this way because
you already assigned line 4"-P-1501-11H to tag number 101-FE-100 when defining the tag number properties.
The PROPERTIES section should appear as shown:
Fields that are mandatory for calculations appear with either a cyan or yellow background.
Cyan indicates that you must enter a value on the process data sheet. Yellow indicates that you may enter a value
on the process data sheet, or you can leave it blank and enter a value for that field
later on the calculation sheet.
-
Scroll down to display the Additional Properties section, and type the values as shown.
-
On the toolbar, click
(Save).
-
On the toolbar, click
(Report)
-
Click Yes when prompted to open the report print preview.
-
On the toolbar, click
(Revisions).
-
On the Revisions dialog box, type the revision data. For details, see Define Process Data for a Line (see Define Line Process Data).