Copy Data from a Form Data Template to a Specification - Intergraph Smart Instrumentation - Training - Intergraph Process, Power & Marine Documentation

SmartPlant InstrumentationTutorial

Language
English
Product
Intergraph Smart Instrumentation
Search by Category
Training
Smart Instrumentation Version
2016 SP1 (11.0.1)
Smart Instrumentation Web Version
(none)

Now you will learn how to automate entry of common data to your specification by using a form data template that you created for the form upon which the flow transmitter spec is based.

  1. On the Specifications Module window module toolbar, click (Open Spec).

  2. On the Open Specification dialog box, do the following:

    1. Under Item type, select Instrument.

    2. Under Item number, type 101-FT-100.

    3. Under Form number, type 56.

    4. Click OK to open the Instrument Specification window for flow transmitter 101-FT-100.

      The specification was generated when you created the 101-FT-100 tag, according to the instrument type profile settings.

  3. In the Select Fluid State pop-up window, select Liquid and click OK.

  4. On the Actions menu, click Copy from Template.

  5. On the Select Form Data Template dialog box, select the new form data template that you created, D/P XMTR TYPE 1.

  6. Click OK to copy data from the form data template to the specification sheet.

    The values in the protected fields are not overwritten.

  7. Save and close the specification.