Place Stiffener Profile Part by Intersection Command - Intergraph Smart 3D - Help

Intergraph Smart 3D Structural Detailing

Language
English
Product
Intergraph Smart 3D
Subproduct
Structural Detailing
Search by Category
Help
Smart 3D Version
12.1 (2019)

 Creates a standalone stiffener profile part on the selected detailed plate part by defining the landing curve of the stiffener as the intersection of the selected plate part and a grid plane.

You can control the boundaries of the stiffener profile by selecting a plate system or part, profile system or part, or grid plane that intersects the landing curve. If you do not define boundaries, the software uses the landing curve ends as the stiffener profile boundaries.

After defining the landing curve and the boundaries, you can set the profile orientation. If the profile part is placed on a plate system, the plate system side and the flange direction for unsymmetrical profile sections are set by the molded convention of the plate system. However, you can override the default settings with the Position Definition control on the ribbon. If the profile part is placed on a standalone plate part, the plate side and flange direction are toggled directly with the Position Definition control on the ribbon.

Stiffener Profile Part by Intersection Ribbon

What do you want to do?