Modify a logical connection - Intergraph Smart 3D - Help

Intergraph Smart 3D Molded Forms

PPMProduct
Intergraph Smart 3D
PPMCategory_custom
Help
Version_S3D
11.x(2016)

The software does not support splitting the logical connection between a profile and a plate.

  1. Click Select on the vertical toolbar.

  2. Select Connections in the Locate Filter.

  3. Select the logical connection to modify.

    The Edit Intersection ribbon appears.

  4. If you need to split the logical connection into more than one region, click Define Region .

  5. Select one or more grid planes, plate systems, profile landing curves, or seams that intersect the logical connection.

  6. Click Select and Edit Region .

    A red circle appears at each region boundary.

  7. Select a region to modify.

    A red arrow appears in the plane of the continuous system.

  8. If needed, click Invert.

    The red arrow moves to the other system, which is now continuous for the selected region.

    You can also right-click the logical connection in a graphic view or in the Workspace Explorer and click Invert from the short-cut menu.

    If the logical connection to be inverted has only one region, the region is automatically selected for the invert operation.

  9. If needed, type a value for Offset.

  10. Click Finish.

    Invert and Offset changes made to the logical connection are not visible in a graphic view until the systems have been detailed in the Structural Detailing task.