The following advanced opening macros allow you to place oval openings with three supports. The software positions a three-support opening by dimensions from the first support and is centers the opening between the second and third supports.
|
|
3S Oval HxW Creates an oval opening with three supports. You can define length and width. See Oval Opening with Three Supports. |
|
|
3S Oval 500x250 Creates an oval opening with three supports. The length is fixed at 500 mm and the width is fixed at 250 mm. See Oval Opening with Three Supports, a 500 mm Length, and a 250 mm Width. |
|
|
3S Oval 600x450 - Creates an oval opening with three supports. The length is fixed at 600 mm and the width is fixed at 450 mm. See Oval Opening with Three Supports, a 600 mm Length, and a 450 mm Width. |
|
|
3S Oval 850x500 - Creates an oval opening with three supports. The length is fixed at 850 mm and the width is fixed at 500 mm. See Oval Opening with Three Supports, an 850 mm Length, and a 500 mm Width. |
