Materials Handling Absolute (MHDrawingAbsoluteLeader) - Intergraph Smart 3D - Reference Data

Intergraph Smart 3D Drawings and Reports Reference Data

PPMProductFamily
3D Design and Visualization
PPMProduct
Intergraph Smart 3D
PPMCategory
Reference Data
Version_S3D
12.1(2019)

Aligns the label and leader line to only one opening or slot for all identically sized openings or slots. The system displays only one label for each set of openings when you use this module.

Usage in Label Template XML

<leadersettings>
<leaderModule>MHDrawingAbsolusteLeader</leaderModule>
<breakline>-1</breakline>
<style>ANSI</style>
</leadersettings>
Customization

breakline

Controls whether or not a breakline appears for the label. The breakline normally connects the leader line to the label.

Type -1 to display the leader jog.

Type 0 to omit the jog.

style

Defines the appearance of a leader line. Specify any of the following styles:

  • ANSI: Applies a thin, solid, dark cyan line style with a filled arrow terminator to the leader line.

  • ANSI_FRACTIONAL: Applies a thick, solid, dark cyan line style with a filled arrow terminator to the leader line.

  • ANSI_NOARROW: Applies a thick, solid, dark cyan line style with no terminator to the leader line.

  • JIS: Applies a thick, solid, dark cyan line style with a large, open arrow terminator to the leader line.

  • ISO: Applies a thick, solid, dark cyan line style with a large, filled arrow terminator to the leader line.

  • DIN: Applies a thick, solid, dark cyan line style with a large, filled arrow terminator to the leader line.

  • ASA: Applies a thick, solid, dark cyan line style with a filled arrow terminator to the leader line.

  • BSI: Applies a thick, solid, dark cyan line style with a large, filled arrow terminator to the leader line.