Feature Type - Intergraph Smart 3D - Reference Data

Intergraph Smart 3D Drawings and Reports Reference Data

PPMProductFamily
3D Design and Visualization
PPMProduct
Intergraph Smart 3D
PPMCategory
Reference Data
Version_S3D
12.1(2019)

Determines whether to place a point for either the turn feature or the straight feature, or both.

  • Select Straight Feature to place a point for the straight feature.

  • Select Turn Feature to place a point for the turn feature.

  • Select Both Straight and Turn Features to place a point for both the straight feature and the turn feature.

  • The default Feature Type is Straight Feature.

  • The Feature Type property is used with the Trench (CivilElevationPointGenerator) point generator.

  • The following options allow you to manually edit the .xml file:

    • Type 1 to place a point for the straight feature.

    • Type 2 to place a point for the turn feature.

    • Type 3 to place a point for both the straight feature and the turn feature.

  • Enclose any of the above values within the following .xml tags.

<featureType>1</featureType>