ISO Standards in Marine Drawings - Intergraph Smart 3D - Reference Data

Intergraph Smart 3D Drawings and Reports Reference Data

PPMProductFamily
3D Design and Visualization
PPMProduct
Intergraph Smart 3D
PPMCategory
Reference Data
Version_S3D
12.1(2019)

Intergraph Smart 3D marine drawings are ISO compliant. Several ISO templates are delivered with the product.

Below is a list of ISO Reference numbers and the description of the document.

ISO 128-20:1996(E)

Technical Drawings – General principles of presentation - Part 20: Basic conventions for lines

ISO 128-21:1997(E)

Technical Drawings – General principles of presentation - Part 21: Preparation of lines by CAD systems

ISO 128-22:1999(E)

Technical Drawings – General principles of presentation - Part 22: Basic conventions for applications for leader lines and reference lines

ISO 128-23:1999(E)

Technical Drawings – General principles of presentation - Part 23: Lines on construction drawings

ISO 128-24:1999(E)

Technical Drawings General principles of presentation - Part 24: Lines on mechanical engineering drawings

ISO 128-25:1999(E)

Technical Drawings General principles of presentation – Part 25: Lines on shipbuilding drawings

ISO 128-30:2001(E)

Technical Drawings – General principles of presentation – Part 30: Basic conventions for views

ISO 128-40:2001(E)

Technical Drawings – General principles of presentation – Part 40: Basic conventions for cuts and sections

ISO 128-50:2001(E)

Technical Drawings – General principles of presentation – Part 50: Basic conventions for representing areas on cuts and sections

ISO 5457:1999(E)

Technical product documentation – Sizes and layout of drawing sheets

ISO 7200:2400(E)

Technical product documentation – Data fields in title blocks and document headers

ISO 5261:1995(E)

Technical Drawings – Simplified representation of bars and profile sections

ISO 2553:2013(E)

Welded, brazed and soldered joints – Symbolic representation on drawings

ISO 5572:1987(E)

Shipbuilding and marine structures – Numbering of equipment and structural elements in ships

ISO 7462:1985(E)

Shipbuilding – Principal ship dimensions. Terminology and definitions for computer applications

ISO 8193:1984(E)

Shipbuilding – Shell plating information

ISO 9203-1:1989(E)

Shipbuilding – Topology of ship hull structure elements – Part 1: Location of elements

ISO 9203-2:1989(E)

Shipbuilding – Topology of ship hull structure elements – Part 2: Description of elements

ISO 9203-3:1989(E)

Shipbuilding – Topology of ship hull structure elements – Part 3: Relations of elements

ISO 129-1:2004(E)

Technical drawings – Indication of dimensions and tolerances – Part 1: General principles

ISO 6428:1982(E)

Technical drawings - Requirements for microcopying

ISO 3898:2013(E)

Bases for design of structure – Names of symbols of physical quantities and generic quantities

ISO 3098-0:2015(E)

Technical product documentation – Lettering – Part 0: General requirements

ISO 3098-2:2000(E)

Technical product documentation – Lettering – Part 2: Latin alphabet, numerals and marks

ISO 3098-5:1997(E)

Technical product documentation – Lettering – Part 5: CAD lettering of Latin alphabet, numerals and marks

By default, the following metric drawing templates are delivered in the ISO format.

LARGE

  • Paper Format (ISO 5457)

    • A0 (valid for A1 and enlarged formats)

    • Title-block (ISO 7200)

  • Lines (ISO 128 Part.25, ISO 6428)

    • Wide 0.7 mm

    • Narrow 0.35 mm

  • Characters (ISO 3098-5, ISO 6428)

    • Titles 7 mm (ISO 3098 BVL – 7)

    • Labels 3.5, bold or 5 (ISO 128 Part.22)

    • Dimensions 3.5, values rounded to 1 mm (ISO 129)

  • Symbols to match above lines and characters for

    • Relative positions of structural elements (BL, CL,...)

    • Sections and details (Section plane, Section and Detail Titles)

    • Profile cross-sections (ISO 5261)

    • Profile end-cuts re-symbolization

    • Section and plates butt joints

    • Welds (ISO 2553)