Point along the 2D curve when you use location id 12, specified as a ratio along the length of the curve. The value must be between 0.0 and 1.0.
-
The Curve Ratio property is used with the following modules.
-
Scantling Weld Symbol (DwgScantlingWeld) content module when you set the location id to 12 (at curve ratio).
-
Weld Point (DrawingPGWelds), Points Along 2D Curve (ISDwgPointsAlongCurve2D), or Point at Corner Cut (MHDrawingPGCornerCut) point generator modules when you set the location id to 12 (at curve ratio).
-
Inside or Along 2D Curve (InsideOrAlongCurve2D) point generator module when you set the location id to 2 (inmost) or 12 (at curve ratio).
-
-
To manually edit the .xml file, you must first specify the locations tag. Then, specify the curveRatio as an attribute within the following .xml tag.
<locations>
<location curveRatio="0.25" .../>
</locations>