3 Primary/Secondary Side Actual Throat Thickness (Primary Side Bevel Depth) - Intergraph Smart 3D - Reference Data

Intergraph Smart 3D Drawings and Reports Reference Data

Language
English
Product
Intergraph Smart 3D
Subproduct
Drawings and Reports
Search by Category
Reference Data
Smart 3D Version
12.1 (2019)

  • You cannot use this property if you also use the Primary/Secondary Side Nominal Throat Thickness property. If you selected check box 4, clear it to use this property.

  • The Primary Side Actual Throat Thickness and the Secondary Side Actual Throat Thickness label templates use the default value, Actual Throat Thickness, from the IJWeldingSymbol property.

  • To create a new label template, do the following:

  1. Create a new label in the [Reference Data Folder]\SharedContent\Drawings\Catalog\Labels\Templates\WeldSymbols folder. For information about creating labels, see Create a Label.

  2. Select the label template you just created from the Label Template list.

    The software does not include Primary Side or Secondary Side in the label template name.

  3. Click Save on the Symbol Configuration tab.

    The software updates the label template XML as shown below.

    Usage in Label Template XML

    <contentModuleSettings>

    <ID attributeName="PrimarySideActualThroatThickness"
    visible="1">WeldSymbols\Primary Side Actual
    Throat Thickness.rtp</ID>

      <ID attributeName="SecondarySideActualThroatThickness"
    visible="1">WeldSymbols\Secondary Side Actual
    Throat Thickness.rtp</ID>

    </contentModuleSettings>

  • The Primary Side Actual Leg Length and the Secondary Side Actual Leg Length label templates use the default value, Actual Leg Length, from the IJWeldingSymbol property.

  • If the label template you need is not delivered to the [RefDataShare]\SharedContent\Drawings\Catalog\Labels\Templates\WeldSymbols folder, create a new label template as described at the beginning of this topic. Select the new label from the Label Template list, and then click Save.

  • The software does not include Primary Side or Secondary Side in the label template name.

    Usage in Label Template XML

    <contentModuleSettings>

      <ID attributeName="PrimarySideActualLegLength"
    visible="1">WeldSymbols\Primary Side
    Actual Leg Length.rtp</ID>

      <ID attributeName="SecondarySideActualLegLength"
    visible="1">WeldSymbols\Secondary Side
    Actual Leg Length.rtp</ID>

    </contentModuleSettings>

Primary Side Actual Throat Thickness (Primary Side Bevel Depth)

Specifies the depth of bevel from the primary side. The value is set from the bevel parameters. If the bevel depth is 0, this indicates no bevel.

Secondary Side Actual Throat Thickness (Primary Side Bevel Depth)

Specifies the depth of he bevel from the secondary side. The value is set from the bevel parameters. If the bevel depth is 0, this indicates no bevel.

Primary Side Actual Leg Length

Specifies the leg length of a fillet weld if populated. The software does not set this value, choosing to set the nominal throat thickness instead. This is only valid for fillet welds.

Secondary Side Actual Leg Length

Specifies the leg length of a fillet weld if populated. The software does not set this value, choosing to set the nominal throat thickness instead. This is only valid for fillet welds.