Std Member With Web - Intergraph Smart 3D - Reference Data

Intergraph Smart 3D Drawings and Reports Reference Data

PPMProduct
Intergraph Smart 3D
PPMCategory_custom
Reference Data
Version_S3D
12.1(2019)

Orthographic graphic module: StiffenerWrapperEntity.dll

Rule set graphic module: Std Member With Web

Extracts the web and flange of a standard member part and customizes the way that a secondary orientation view is resymbolized in a drawing. Parameters for resymbolization can be defined for each cross-section type. The delivered parameters are defined in Std Member With Flange.xml, located in the [Reference Data Folder]\SharedContent\Drawings\Catalog\Rules\DBRRules\Resymbolization folder.

Parameters are defined with respect to edges on the member cross-section or by a geometry aspect type. The parameters for Std Member With Flange are the same as Stiffener With Flange. For more information, see Stiffener With Flange.