10 Primary/Secondary Side Contour - Intergraph Smart 3D - Reference Data

Intergraph Smart 3D Drawings and Reports Reference Data

PPMProduct
Intergraph Smart 3D
PPMCategory_custom
Reference Data
Version_S3D
12.1(2019)

This property corresponds to the IJWeldingSymbol property. You cannot configure it using the Symbol Configuration tab.

Primary Side

Specifies the finished contour of the face of the weld. Set to none for all weld types.

Secondary Side

Specifies the finished contour of the face of the weld. Set to none for all weld types.