Design Equipment Part Separator - Intergraph Smart 3D - Reference Data

Intergraph Smart 3D Drawings and Reports Reference Data

PPMProduct
Intergraph Smart 3D
PPMCategory_custom
Reference Data
Version_S3D
12.1(2019)

Orthographic graphic module: DesignEquipmentPartSeparator.dll

Rule set graphic module: Design Equipment Part Separator

Separates design equipment into body (first shape placed), shapes, nozzles, and parts (child components). You can use this module to label and symbolize nozzles on design equipment.

To use this module, apply it to the graphic preparation rules in a view style that uses Design Equipment as the filter. After this is done, you can add a row to the view style to filter specifically for Pipe Nozzles.

The graphic below shows the difference between the default view style and one using the graphic rule:

For a graphic rule that performs the same operation for general equipment, use Equipment Nozzle Separator.

Subfilters

To change the graphic representation of shapes, nozzles, or parts when this custom graphic rule is applied, you can apply subfilters to the individual parts.

Shapes

Use this subfilter to apply a graphic rule (line style, color, etc.) to the shapes of process equipment. Use this syntax: <Filter Name>::Shapes.

Nozzles

Use this subfilter to apply a graphic rule (line style, color, etc.) to the nozzles on process equipment. Use this syntax: <Filter Name>::Nozzles.

Parts

Use this subfilter to apply a graphic rule (line style, color, etc.) to the parts on process equipment. Use this syntax: <Filter Name>::Parts.