Self intersected path is not valid for the Trench Run. Revise the sketch3d path. - Intergraph Smart 3D - Administration

Intergraph Smart 3D Troubleshooting Reference

PPMProduct
Intergraph Smart 3D
PPMCategory_custom
Administration & Configuration
Version_S3D
12.x(2018)

Meaning: If you route a Sketch 3D path with self-intersecting segments, an error occurs.

Recovery:

  1. In the Workspace Explorer, select the trench run that is in error.

  2. Click Path .

  3. Edit the Sketch 3D path so that there are no self-intersecting segments.

  4. Click Finish on the path ribbon, and then click Finish on the command ribbon.