Failed while setting Batch Reentry - Intergraph Smart 3D - Administration

Intergraph Smart 3D Troubleshooting Reference

PPMProduct
Intergraph Smart 3D
PPMCategory_custom
Administration & Configuration
Version_S3D
12.x(2018)

Meaning: Failed while setting Batch Reentry. Possibly, a computer memory problem.

Recovery:

  1. Exit and restart the command.

  2. If this did not solve the problem, reboot the computer to remove any cached computer memory problems.

  3. Open Smart 3D with a fresh session.

  4. If problem still exists, report steps taken to your support group.