Error occurred while computing sketched opening shape - Intergraph Smart 3D - Administration

Intergraph Smart 3D Troubleshooting Reference

PPMProduct
Intergraph Smart 3D
PPMCategory_custom
Administration & Configuration
Version_S3D
12.x(2018)

Meaning: An error occurred when trying to use the sketched opening symbol. The cutout operator cannot be evaluated.

Recovery:

  1. Open the Structure task.

  2. Click Select .

  3. Set the Locate Filter to Openings.

  4. Select the opening in error.

  5. Click Draw on the ribbon.

  6. Check and redefine the opening sketch as needed.