This hole is out of date. - Intergraph Smart 3D - Administration

Intergraph Smart 3D Troubleshooting Reference

Intergraph Smart 3D
Administration & Configuration

Meaning: The hole is out-of-date because either the hole or a related object is not in "Working" status. You also might not have the required permission.

Recovery: Open the Structural Detailing task. Select Tools > Delay Settings and turn off Delay if it is on.

Make sure the hole and all the related objects are in the "Working" status and that you have permission to modify the hole.

  1. Edit the properties of the object.

  2. Select the Configuration tab.

  3. Verify that Status is set to Working.

  4. Click OK.