For the Gap frame connection to work correctly, all participating members must be placed with cardinal point 5. - Intergraph Smart 3D - Administration

Intergraph Smart 3D Troubleshooting Reference

PPMProduct
Intergraph Smart 3D
PPMCategory_custom
Administration & Configuration
Version_S3D
12.x(2018)

Meaning: The gap frame connection does not work correctly using cardinal points other than 5.

Recovery:

  1. Open the Structure task.

  2. Click Select .

  3. Set the Locate Filter to Member Parts.

  4. Select all the member parts participating in the gap frame connection.

  5. Set Cardinal point on the ribbon to 5 - Center.