Draw Rebar with Scaled Sketching - Intergraph Smart 3D - Help

Intergraph Smart 3D Orthographic Drawings

PPMProductFamily
3D Design and Visualization
PPMProduct
Intergraph Smart 3D
PPMCategory
Help
SPFVersion_custom
2019 (10.0)
Version_S3D
12.1(2019)
  1. From the Drawings environment, open a drawing. In this example, the drawing contains equipment.

  2. Click Scaled Sketching to open the Scaled Sketching ribbon.

  3. Click Select color for referenced data to set the color of any objects not being edited using the scale factor.

  4. Click the SmartFrame in which you would like to sketch. The scale automatically matches the SmartFrame scale.

    • Do not create or edit any layers when using the scaled sketching command.

    • To get accurate dimensional data about scaled objects, be sure to dimension them while in scaled sketching mode. The dimensions are automatically configured to display at the value in which they were drawn.

  5. Click Enter Scaled Sketch mode to start drawing at the selected scale.

    The system scales the drawing sheet to match the specified scale value.

  6. Use the tools in the Draw toolbar to draw rebar-reinforced concrete.

  7. Click Finish to end the selected scale mode.

  • Any objects drawn while in Scaled Sketching mode will move with the view if it is moved.

  • The only way to exit scaled sketching is to click Finish. All modifications you made in the document are retained.

  • Whenever you finish using scaled sketching, the undo history is cleared and you cannot undo any previous edits. Undo is available after you continue working in the software.