Piping Translation Maps - Intergraph Smart 3D - 2014 R1 - Administration

Intergraph Smart 3D PDMS Design and Data Exchange

PPMProductFamily
3D Design and Visualization
PPMProduct
Intergraph Smart 3D
PPMCategory
Administration
Version_S3D
10.1(2014R1)

Use the piping translation mapping sheets in the PDMSS3DImportMapping.xls workbook to map PDMS piping to relevant Smart 3D piping properties. Before importing PDMS piping model data to Smart 3D, modify these sheets to ensure that the following criteria are met:

  • All PDMS specifications in the PDMS DATAL file are mapped to corresponding Smart 3D specifications.

  • All components in the PDMS model are mapped to corresponding components in Smart 3D.

  • All PCOMPs and INSTs in PDMS are mapped to corresponding Smart 3D piping specialties and instruments.

  • All PDMS gaskets are mapped to corresponding gaskets in the Smart 3D catalog.

After you complete all of the mapping in the PDMSS3DImportMapping.xls workbook, run PDMS Import Validation to validate the mapping data in the workbook. Resolve any missing entries reported by the validation tool. For more information, see PDMS Import Validation.

The PDMSS3DImportMapping.xls workbook delivers the following structure translation maps:

ComponentOrientationAttrMap

Provides options for mapping the primary direction (flow direction) and the secondary direction (normal direction) of the PDMS component in the PDMS catalog. For more information, see ComponentOrientationAttrMap.

CPMPipeRunMap

Maps PDMS BRANCH attributes, such as HBORE and PSPEC, to relevant Smart 3D pipe run class properties. For more information, see CPMPipeRunMap.

CPPipelineSystemMap

Maps PDMS PIPE attributes to Smart 3D pipeline system properties. For more information, see CPPipelineSystemMap.

PDMSS3DFileConstantsV12Below

Defines the PDMS constants that are present in the PDMS piping .att file (for PDMS versions prior to 12.0) to relevant Smart 3D values. These Smart 3D constants are used in the code. You do not need to change the mapping. For more information, see PDMSS3DFileConstantsV12Below.

PDMSS3DFileConstantsV12Above

Defines the PDMS constants that are present in the PDMS piping .att file (for PDMS version 12.0 and later) to relevant Smart 3D values. These Smart 3D constants are used in the code. You do not need to change the mapping. For more information, see PDMSS3DFileConstantsV12Above.

PipingClassMap

Maps the supported piping classes between PDMS and Smart 3D. This is the main mapping sheet for the piping discipline. This sheet contains class mapping sheets for pipeline systems, pipe runs, pipe components, pipe instruments, and pipe supports. This mapping sheet also contains a global sheet that provides additional mapping information. For more information, see PipingClassMap.

PipeRunSpecMap

Maps PDMS piping specifications with the relevant Smart 3D specification. For more information, see PipeRunSpecMap.

PipeComponentAttrsMap

Maps PDMS piping component attributes, such as RADI, to relevant Smart 3D piping component properties, such as BendRadius, or to UserAttributes.<Property>. For more information, see PipeComponentAttrsMap.

PipeInstrumentAttrsMap

Maps PDMS piping instrument attributes to relevant Smart 3D piping instrument properties or to UserAttributes.<Property>. For more information, see PipeInstrumentAttrsMap.

PipeSupportAttrsMap

Maps PDMS piping support attributes to relevant Smart 3D piping support properties or to UserAttributes.<Property>. For more information, see PipeSupportAttrsMap.

PipingGlobalsMap_V11

Defines the global settings for importing a PDMS DATAL or .att file prior to PDMS version 12.0. For more information, see PipingGlobalsMap_V11.

PipingGlobalsMap_V12

Defines the global settings for importing a PDMS DATAL or .att file for PDMS version 12.0 and later. For more information, see PipingGlobalsMap_V12.

RunChangeComponentsMap

Provides options for mapping PDMS piping RunChange components, such as reducers and tees into Smart 3D. Use this mapping sheet to map the PDMS SPRE to the NPD values for each PDMS component port in ascending order. For example, map the NPD value for Port1, and then map the NPD value for Port2, and so forth. For more information, see RunChangeComponentsMap.

ShortCodeAdditionalAttributes

Maps PDMS piping component and instrument short codes to relevant Smart 3D component properties, such as GeometryType, TreatItemCodeAsTag, IsRotationApplicable, and IsSpecificallyPlaced, and its corresponding short code value. For more information, see ShortCodeAdditionalAttributes.

SP3DXMLPartTypeMap

Maps PDMS piping GTypes, such as VALVE, FLANGE, ELBOW, and INST, that are present in the DATAL or .att File to relevant Smart 3D piping components or instruments. For more information, see SP3DXMLPartTypeMap.

SPREFSP3DIdentifierPatternMap

Maps PDMS piping component or instrument SPREs to relevant Smart 3D piping short codes, such as Flange or Concentric Size Change. For more information, see SPREFSP3DIdentifierPatternMap.

SPREFSP3DOptionCodePatternMap

Maps the PDMS component SPRE to the relevant Smart 3D option code. For more information, see SPREFSP3DOptionCodePatternMap.