Basic Clamp Attributes - Intergraph Smart 3D - Reference Data

Intergraph Smart 3D Hangers and Supports SmartParts Configuration

PPMProductFamily
3D Design and Visualization
PPMProduct
Intergraph Smart 3D
PPMCategory
Reference Data
Version_S3D
12.x(2018)

IJUAhsDiameter1::Diameter1

Specifies the outside diameter of the pipe.

IJUAhsHeight1::Height1

Specifies the height from the center of the pipe to the center of the pin at the top of the clamp.

IJUAhsHeight2::Height2

Specifies the height from the bottom of the clamp to the center of the pipe.

IJUAhsOffset1::Offset1

Specifies the vertical distance from the center of the pipe to the top end of the rod, along the central axis of the rod.

IJUAhsOffset2::Offset2

Specifies the vertical distance from the center of the pipe to the bottom end of the rod, along the central axis of the rod.

IJUAhsOffset3::Offset3

Specifies the distance from the center of the pin to the top of the grip clamp.

IJUAhsAngle1::Angle1

Specifies the angle between the central axis of the rod and the vertical axis of the clamp at the top end of the clamp, along the perpendicular plane of the pipe axis.

IJUAhsAngle2::Angle2

Specifies the angle between the central axis of the rod and the vertical axis of the clamp at the bottom end of the clamp, along the perpendicular plane of the pipe axis.

IJUAhsRodDiameter::RodDiameter

Specifies the diameter of the rod that encircles the pipe.

IJUAhsWidth1::Width1

Specifies the Width1 of the grip pipe clamp.

IJUAhsThickness1::Thickness1

Specifies the Thickness1 of the grip pipe clamp.

IJUAhsWidth2::Width2

Specifies the Width2 of the grip pipe clamp.

IJUAhsThickness2::Thickness2

Specifies the Thickness2 of the grip pipe clamp.