These properties are used to specify the different port types and their sizes for the eye nut.
Port1 – RodEnd – Located at 0, 0, 0
PortType |
Size |
MinSize |
MaxSize |
1001 – IntThdRH |
|
Not applicable for this port type. Use zero. |
Not applicable for this port type. Use 9999. |
1003 – IntThdLH |
|
Not applicable for this port type. Use zero. |
Not applicable for this port type. Use 9999. |
Port2 – Eye – Located at 0, 0, OverLength1 – InnerLength2 + PinDiameter / 2.0
PortType |
Size |
MinSize |
MaxSize |
1007 – Eye |
The thickness of the eye to be compared against the opening in the connecting item. This lets you verify that the thickness of the eye fits into the opening. It is same value as Thickness1 property. |
The smallest pin or bolt that will fit inside the eye. Usually, this value is zero. |
The largest pin or bolt that will fit inside the eye, from the catalog specs. |
Port3 – Eye – Surface – Located at 0, 0, OverLength1 + Height1
PortType |
Size |
MinSize |
MaxSize |
1200 - Other |
Not applicable for this port type. Use zero. |
Not applicable for this port type. Use -9999. |
Not applicable for this port type. Use 9999. |