End Curve Ratio - Intergraph Smart 3D - Reference Data

Intergraph Smart 3D Drawings and Reports Reference Data

PPMProductFamily
3D Design and Visualization
PPMProduct
Intergraph Smart 3D
PPMCategory
Reference Data
Version_S3D
10.1(2014R1)

Specifies the end point on the 2D curve. The software defines this value as a ratio along the length of the curve. The ratio must be between 0.0 and 1.0.

The software searches for clear space positioning between the start point and the end point. The end curve ratio must be greater than the start curve ratio.

  • The Clear Space Position by 2D Curve (ISDwgPositionByCurve2D) positioning module uses the End Curve Ratio property.

  • To manually edit the .xml file, enclose the ratio within the following .xml tags.

<endCurveRatio>1</endCurveRatio>