SMRulerAxisSymbolContent - Intergraph Smart 3D - Reference Data

Intergraph Smart 3D Drawings and Reports Reference Data

PPMProductFamily
3D Design and Visualization
PPMProduct
Intergraph Smart 3D
PPMCategory
Reference Data
Version_S3D
10.1(2014R1)

Creates a reference axis line with a tick mark at each reference plane. This module is used with the Absolute Axis Position (SMDwgPositionAxis) positioning module.

Usage in Label Template XML

<label>

<content>

<contentModule value="SMRulerAxisSymbolContent"/>

<contentModuleSettings>

<axisInfo>

<marginDefinition>1</marginDefinition>

<bottom>

<offset>0.03</offset>

<style>Normal</style>

<tickMarkInfo>

<plusX>0.0</plusX>

<minusX>0.01</minusX>

<style>Normal</style>

</tickMarkInfo>

</bottom>

<left>

<offset>0.03</offset>

<style>Normal</style>

<tickMarkInfo>

<plusX>0.0</plusX>

<minusX>0.01</minusX>

<style>Normal</style>

</tickMarkInfo>

</left>

</axisInfo>

</contentModuleSettings>

</content>
</label>

Customization

axisInfo - Contains options for axis graphics.

tickMarkInfo - Contains options for tick mark graphics.

marginDefinition - Specifies the relationship of the grid axes to the drawing view for measuring the margin offset of the axes.

XML value

At View Frame
(default value)

Measures the margin offset for each axis from the edges of the view SmartFrame, shown as dashed lines in the example.

0

At Drawing Area

Measures the margin offset for each axis from the edges of the drawing area, shown as solid lines in the example.

1

If you set the frame behavior to Frame resizes to drawing area, then the view frame and the drawing area are the same size, and both values provide the same result, as shown in the following example.

For more information, see Area Tab (Edit Ruleset View Style Dialog Box) in the Drawings and Reports Reference Data Guide.

bottom or top - Specifies the side of the drawing view on which the software draws the horizontal axis. Other properties are defined for this side. Select either Bottom or Top from the Horizontal Ruler Axis Position list. Select None for no horizontal ruler axis to display.

Bottom

Top

left or right - Specifies the side of the drawing view on which the software draws the vertical axis. Other properties are defined for the side. Select either Left or Right from the Vertical Ruler Axis Position list. Select None for no ruler axis to display.

Left

Right

offset - Distance of a grid axis from the drawing view. Use offset in combination with the defined axis (bottom, top, left, or right) and the margin definition.

style - Defines the line style for the axis or tick mark. Use style in combination with the defined axis (bottom, top, left, or right) and with the tick mark information.

Line styles are defined in [Reference Data Product Folder]\SharedContent\Drawings\Catalog\templates\Styles.sha.

plusX - Defines the length of the grid tick mark from the axis and toward the drawing view.

minusX - Defines the length of the grid tick mark from the axis and away from the drawing view.

Example