Place multiple supports along a feature - Intergraph Smart 3D - Help

Intergraph Smart 3D Hangers and Supports

PPMProductFamily
3D Design and Visualization
PPMProduct
Intergraph Smart 3D
PPMCategory
Help
Version_S3D
12.x(2018)
  1. Click Tools > Point Along.

  2. Click Reference on the ribbon, and then select the feature along which you are planning to place supports.

  3. Identify the point to measure from on the feature.

  4. Click Place Support by Point on the vertical toolbar.

  5. Select the feature to support.

  6. Click Accept .

  7. Select a structure to support the selected feature.

  8. Click Accept .

  9. Do one of the following:

    1. If the Rule is checked, select the support type in the Type list.

    2. If the Rule is not selected, select More in the Type list, and then navigate the catalog browser to locate the appropriate support.

  10. In the Distance box on the Point Along ribbon, specify the distance from the measure-from point that you identified in step 3 to the first support.

    The software displays the first support at the distance that you defined.

  11. Click in the graphic view to position the first support.

  12. In the Copies box, type the number of supports to place.

  13. Click Finish.