Place a trench with curve features between two straight features - Intergraph Smart 3D - Help

Intergraph Smart 3D Civil

Language
English
Product
Intergraph Smart 3D
Subproduct
Civil
Search by Category
Help
Smart 3D Version
12 (2018)
  1. In the Grids task, create grids as needed for drawing the trench path.

  2. In the Civil task, click Place Trench Command .

  3. Click Path on the Place Trench Ribbon, and then place two straight segments at an angle.

  4. Click Edit on the Create Path Ribbon, and then click the sketch point at the miter location.

  5. Select Bend from the Turn Type list.

  6. In the Value box, type a radius for the curve segment. The curve segment radius must be less than the minimum adjacent segment length.

  7. Click Finish to create the trench curve feature. An example is shown below.

    1 - Straight feature

    2 - Curve feature