-
Click Select on the vertical toolbar.
-
Set the Locate Filter to Wall Systems.
-
Select the wall to which to add segments.
-
Click Select a Path on the Place Wall Ribbon.
-
Click Sketch 2D on the ribbon.
-
Select objects in the model that you want to see when sketching the wall path in the 2-D environment.
-
Click Draw .
-
Click Split on the vertical toolbar.
-
Identify the two locations on the wall between which you want to add to the wall. Be sure to use the Bottom Up option during selection.
-
Click Add or remove graphic from a group on the Change toolbar.
-
Click Select Graphic Group on the ribbon.
-
Select the original wall path. Be sure to use the Bottom Up option during selection.
-
Click Select elements to add to group or remove from it on the ribbon.
-
Select the segment of the wall path between the two points that you identified during the Split command. Be sure to use the Bottom Up option during selection.
-
Click Remove on the ribbon. You have now removed the segment from the wall path group.
-
Click Select on the vertical toolbar.
-
Select the segment between the two points that you just removed from the group. Be sure to use the Bottom Up option during selection.
-
Press Delete on the keyboard.
You should now have a wall path with a gap in it.
-
Using commands on the vertical toolbar, like the Line command, draw the new wall segment in the gap. Make sure you connect to the two ends of the gap.
-
In the 2-D environment, click Close .
-
Click Finish.
-
Set the wall system, type, composition, and other properties.
-
Optionally, click Select Boundaries to limit the height of the wall.
-
Click Finish to place the new wall segments in the model.