-
The Input tab of the Stress Isometrics Annotations panel lists input features. You can select a category from the Feature list to view data related to a feature.
-
On the Home ribbon of the main CAESAR II window, select File > Open to open a model.
-
On the Home ribbon, click Reports > Generate Stress Isometrics
.
The model displays in the C2Isogen window.
-
Select StressIso > Annotations.
The Stress Isometric Annotations panel displays on the right
-
Select the Input tab.
-
Click the Feature list and select a feature category.
At the appropriate node, the software displays an annotation containing the data associated with the selected category.
-
Select a row in the Select column to view the feature information on the associated node of the 3D model in the graphic view. Clear the row to remove the feature information in the model.
-
If you want to view information from multiple Feature categories, select the categories and the required rows.
-
Select StressIso > Save Annotation to save annotations for the selected input information.
-
When you select Restraint/Hanger Types in the Feature list, select Tag and GUID to display Tag and GUID columns at the end of each row. When you select a row, the annotation in the graphic view includes tag (support ID) and GUID data.
-
The software displays the model parameters, such as Diameter, Insulation Thickness, and Wall Thickness, in the drawing only when there is a change in these parameters.
-
To select multiple nodes in the list, select the first row (in the Select column), press SHIFT, and then select the last row.
-
To remove an annotation, right-click the annotation tag in the graphic view, area and click Delete Note.
-
When you select a node for Displacements, External Forces/Moments, Restraint/Hanger Types, or SIF/Fitting Data on the Feature list, the software also selects the node on the Node Numbers feature and displays the node on both the graphic view and isometric drawing.
To remove the node number, clear the node selection for the Node Numbers feature.