Join a pipe run from a nozzle or port - Intergraph Smart 3D - Help

Intergraph Smart 3D Piping

PPMProduct
Intergraph Smart 3D
PPMCategory_custom
Help
SPFVersion_custom
2019 (10.0)
Version_S3D
11.x(2016)
  1. Click Quick Route on the vertical toolbar.

  2. Select a nozzle or port from which to extend the pipe run.

    The software displays the New Pipe Run dialog box. For more information, see New Pipe Run Dialog Box.

  3. Select a pipe run, and if necessary, specify required properties.

  4. Select a terminating end feature or a nozzle.

    The software displays all possible path options based on the location of the selected features. You can navigate through the path options and view the dynamic computed graphics.

  5. On the Path Options menu, select an option that you want. You can click the option or press Enter to confirm your selection.

    By default, the software considers the highlighted option as your selection.

  6. Click Finish.

    The software joins the two end points along the selected path.

    If the selected path results in skews, then the software prompts you with a warning message.

    1. Click No to undo the current path selection.

    2. Select another path option, and then click Finish.

  7. Continue quick routing, or right-click to exit the command.

See Also

Join two existing pipe runs