Select pipe run settings - Intergraph Smart 3D - Help

Intergraph Smart 3D Piping

PPMProduct
Intergraph Smart 3D
PPMCategory_custom
Help
SPFVersion_custom
2019 (10.0)
Version_S3D
11.x(2016)
  1. On the New Pipe Run dialog box, choose the pipeline for the new run in the Pipeline box.

    The Pipeline box lists up to the last ten selected pipelines. Choosing the More option at the bottom of the list allows you to browse all pipelines in the model.

  2. Optionally, in the Name box, type the name of the new pipe run that you are creating.

  3. Set the specification of the new pipe run in the Specification box.

  4. In the Nominal Diameter box, select the NPD for the pipe run.

  5. Set other pipe run properties as needed.

  6. Click OK to return to the Route Pipe command.

  • Use the Category option to view more properties that you can set for the pipe run.

  • If the piping specification that you selected has service limits defined, you must define at least one temperature value and one pressure value for the pipe run. Do this by selecting Temperature and Pressure from the Category option.