Insert a feature break - Intergraph Smart 3D - Help

Intergraph Smart 3D Piping

PPMProduct
Intergraph Smart 3D
PPMCategory_custom
Help
SPFVersion_custom
2019 (10.0)
Version_S3D
11.x(2016)
  1. Click Insert Split on the vertical toolbar.

  2. For the Split Mode, select Single Split.

  3. Click Feature Break on the ribbon.

  4. Select the pipe feature to break.

  5. Click to define the position of the feature break.

  • You can use the Tools > Pinpoint and Tools > Point Along commands to locate more precisely the position of the feature break.

  • When splitting using a feature break, no weld or connection is placed so the two- features combined represent a single pipe part. By using a feature break, you can stop heat-tracing, insulation, or a surface coating at an arbitrary location along the pipe instead of at a weld or other break in the line.