Place a branch fitting on a component - Intergraph Smart 3D - Help

Intergraph Smart 3D Piping

PPMProduct
Intergraph Smart 3D
PPMCategory_custom
Help
SPFVersion_custom
2019 (10.0)
Version_S3D
11.x(2016)
  1. Click Insert Component on the vertical toolbar.

  2. Click the component on which to place the branch fitting.

  3. On the ribbon bar, select the pipe run in which to insert the branch fitting.

  4. In the Type box, select a branch component.

  5. If necessary, specify the distance and reference port to position the branch fitting.

  6. Click Component Orientation , and set the orientation for the branch fitting. This step is applicable if the base component is a turn feature (such as an elbow or pipe bend), ALF end leg, or end feature (cap, blind flange, and so forth).

  7. Click Finish.

When you route from the branch fitting, the software automatically generates a tap. If you delete the branch fitting, the automatically generated tap also gets deleted.