Insert a piping specialty item - Intergraph Smart 3D - Help

Intergraph Smart 3D Piping

PPMProduct
Intergraph Smart 3D
PPMCategory_custom
Help
SPFVersion_custom
2019 (10.0)
Version_S3D
11.x(2016)
  1. Click Insert Component on the vertical toolbar.

  2. Select the pipe, pipe end, or nozzle in which to insert the piping specialty item. If you select a pipe, the point at which you identify the pipe is used as the placement point.

  3. In the Type list, select Browse piping custom specialties.

    The Browse piping custom specialties dialog box displays.

  4. In the Specialties box:

    1. Select More.

      When you are placing the component for the first time, More is the only option that displays.

      The Select Piping Specialty dialog box displays.

    2. Select a component from the catalog, and then click OK.

    3. Skip to step 5.

      OR

    4. Select a recently placed component from the list, and then click OK.

  5. Click Finish to confirm the component placement.

When placing piping specialty items on a pipe, the software uses the divisor point location as the placement point if the divisor point glyph is displayed when you select the pipe. This functionality allows you to place an item at the mid-point of a pipe for example. You can set the number of divisor points on the Tools > Options > SmartSketch3D tab.