Shape Top Left/Right Properties - Intergraph Smart 3D - Reference Data

Intergraph Smart 3D Hangers and Supports SmartParts Configuration

Language
English
Product
Intergraph Smart 3D
Subproduct
3D Symbols
Search by Category
Reference Data
Smart 3D Version
12.1 (2019)

These properties specify the corner attributes for the side plates. These properties are optional. You must enter these values when these various corner shapes of side plates are needed.

Plate shape functions are used for the side plates for top left and top right shape settings. Because the bottom of the sides are attached to the base, when you flip the graphic over, the top is the edge farthest away from the base as shown in the following example.

The following types of corner for top left or top right shapes are supported:

  • Rectangular notch corner

  • Angled notch

  • Round notch (Convex)

  • Round (Concave)

You need to select a corner type and enter the values accordingly. For information about the properties, see the following topics:

Descriptions of the Shape Top Left properties are the same as those for Shape Top Right, but the difference is in the corners as shown below.

Shape Top Left

Shape Top Right