Nozzle Types - PDS - Help

Plant Design System (PDS) Equipment Modeling (PD_EQP)

PPMProductFamily
3D Design and Visualization
PPMProduct
PDS
PPMCategory
Help

This section displays the available nozzle tutorials. If necessary, detailed explanations are provided below each tutorial.

Nozzle Type 1 - Radial — Is a straight nozzle with the nozzle centerline lying on the radial plane.

Nozzle Type 2 - Axial — Is a straight nozzle normal to the radial plane.

Nozzle Type 3 - Axial Elbow — Is an elbow nozzle placed with the hub centerline normal to the radial plane.

Nozzle Type 4 - Tangential — Is a straight nozzle lying on the radial plane but the nozzle centerline does not intersect the vessel axis.

Nozzle Type 5 - Skew — Is a straight nozzle that is tilted from both the vessel axis and the radial plane.

Nozzle Type 6 - Radial Elbow — Is an elbow nozzle placed with the hub radial to the vessel axis.

Nozzle Type 7 - Offset Radial Elbow — Is an elbow nozzle placed with the hub tangential to the vessel axis.

Nozzle Type 8 - Offset Skew — Is a skew nozzle with a parallel offset in the radical plane.

  • N205 — Is a parametric which places predefined nozzles on a complex vertical cylindrical equipment with a skirt as the defined support.

  • N210 — Is a parametric which places predefined nozzles on a simple vertical cylindrical equipment with a skirt as the defined support.

  • N215 — Is a parametric which places predefined nozzles a simple vertical cylindrical equipment with legs as the defined support.

  • N230 — Is a parametric which places predefined nozzles on a spherical equipment.

  • N240 — Is a parametric which places predefined nozzles on a complex horizontal cylindrical equipment.

  • N245 — Is a parametric which places predefined nozzles on a simple horizontal cylindrical equipment.

  • N305 — Is a parametric which places predefined nozzles on a horizontal shell and tube exchanger.

  • N307 — Is a parametric which places predefined nozzles on a kettle exchanger.

  • N310 — Is a parametric which places predefined nozzles on a vertical shell and tube exchanger.

  • N320 — Is a parametric which places predefined nozzles on a double pipe exchanger.

  • N325 — Is a parametric which places predefined nozzles on a plate exchanger.

  • N330 — Is a parametric which places predefined nozzles on an air cooler.

  • N405 Is a parametric which places predefined nozzles on a horizontal rotating equipment and driver.

  • N410 Is a parametric which places predefined nozzles on a vertical rotating equipment and driver.